House Plan: - 3 bedroom house blueprints

Comments: Brick steps with 20 inch columns to 9 ft covered porch with 12 inch columns Main ceilings 10 ft -Upper 9 ft Foyer entry with 8 inch columns to Dining and Formal Living rooms Great room with corner gas fireplace open to Kitchen/Breakfast area Kitchen with island eat at bar French doors to rear covered porch Laundry room with sink Upper floor: Game room with computer center and access to front 10 ft balcony Master suite with large walk-in. Closet and French doors to Rear balcony Master bath with corner glass shower, whirlpool tub and double vanities Two remaining bedrooms have own baths and large walk-in. closets Bedroom 3 with built-in. Window seat

Square Footage
Floor1: 1583
Floor2: 1973
Total: 3556
Garage Storage: 2139
Porch: 999

Wall Construction: 2x4
Roof Framing: 2x6
Ridge Height: 38-8

Insulation
Exterior Walls: R-13
Ceiling Minimum: R-30
Floor Minimum: R-19

Roof
Designed Roof Load: 45-lbs. Psf lbs. psf
Roof Pitch - Main: 10:12
Roof Framing Description: Conventional
Roof Type: Shingle

Ceiling Height
Main: 10 ft 0 inches
Upper: 9 ft 0 inches

• Foundation Plan - (1/4" or 1/2" = 1') Most plans are available with a slab or crawlspace foundation: Optional walkout style basement (three walls masonry with a wood framed rear wall with notes for the builder to locate the windows and doors) and optional full basement foundation available if the plan allows, at an additional cost.
  
  
• Floor Plans (1/4"= 1') Each home plan includes the floor plan showing the dimensioned locations of walls, doors, and windows as well as a schematic electrical layout.
  
  
• Set of Elevations (1/4"= 1') All plans include the exterior elevations (front, rear, right and left) that show and describe the finished materials of the house.
  
  
• Building Sections (1/4" or 1/2" = 1') The building sections are vertical cuts through the house and the stairs showing floor, ceiling and roof height information.
  
  
• Kitchen and Bath Elevations (1/2" = 1') The kitchen and bath elevations show the arrangement and size of each cabinet and other fixtures in the room. These drawings give basic information that can be used to create customized layouts with a cabinet manufacturer
  
  
• Miscellaneous Details (3/4" = 1') These are included for many interior and exterior conditions that require more specific information for their construction.
  
  
• Roof Overview Plan (1/4" = 1') This is a "bird's eye" view showing the roof slopes, ridges, valleys and any saddles